BandaAncha.eu

  • 🔍 en 📰 artículos ⏎
  • 🔍 en 💬 foros ⏎
  • 🔍 en 👇 este 💬 foro ⏎
  • 🔍 en 👇 este 💬 tema ⏎
Regístrate Regístrate Identifícate Identifícate
ADSL

Ruido de mi linea y FAIL ATM SEGMENT Y END TO END PING????

BocaDePez
BocaDePez

Hola, buenos diasm tengo contratado el adsl hasta 20mb, pero en mi zona segun Jazztel corresponden 6mb y segu el router Comtrend 536+ tengo:

Downstream: 6142
Downstream: 510

Alguien me puede comentar como tengo los valores de ruido de la linea y tambien más abajo he puesto un copy-paste de una diagnosis del router y veo que aparecen 2 valores con FAIL
del PING, esto es importante?, debo solucionarlo?

Muchas gracias por vuestra ayuda, un placer postear en este foro.

Statistics -- ADSL
Mode: ADSL2+
Type:
Line Coding: Trellis On
Status: No Defect
Link Power State: L0

Downstream Upstream
SNR Margin (dB): 24.6 22.0
Attenuation (dB): 24.0 9.7
Output Power (dBm): 0.0 0.0
Attainable Rate (Kbps): 13228 44300
Rate (Kbps): 6142 510
MSGc (number of bytes in overhead channel message): 105 8
B (number of bytes in Mux Data Frame): 111 13
M (number of Mux Data Frames in FEC Data Frame): 2 8
T (Mux Data Frames over sync bytes): 1 5
R (number of check bytes in FEC Data Frame): 16 16
S (ratio of FEC over PMD Data Frame length): 1.1566 6.9189
L (number of bits in PMD Data Frame): 1660 148
D (interleaver depth): 64 8

Super Frames: 3486475 3486473
Super Frame Errors: 4 1
RS Words: 193499374 29635020
RS Correctable Errors: 7946 0
RS Uncorrectable Errors: 75 N/A

HEC Errors: 4 0
OCD Errors: 0 0
LCD Errors: 0 0
Total Cells: 810511806 67367472
Data Cells: 96967537 20830294
Bit Errors: 0 0

Total ES: 4 1
Total SES: 0 0
Total UAS: 27 0
-------------------------------------------------------------------------------

Lo de FAIL, aqui lo dice:

Test your Ethernet Connection: PASS Help
Test your USB Connection: DOWN Help
Test your Wireless Connection: DOWN Help

Test the connection to your DSL service provider
Test ADSL Synchronization: PASS Help
Test ATM OAM F5 segment ping: FAIL Help
Test ATM OAM F5 end-to-end ping: FAIL Help

Test the connection to your Internet service provider
Test PPP server connection: PASS Help
Test authentication with ISP: PASS Help
Test the assigned IP address: PASS Help
Ping default gateway: PASS Help
Ping primary Domain Name Server: PASS Help

SALU2

:-?

Este tema está cerrado a nuevas respuestas. Abre un nuevo tema para retomar la conversación.
barryway

Buenos Dias
los 2 Test ATM OAM F5 es normal que esten en FAIL en adsl2+ 6 y 20 mb,
solo tiene importancia para el adsl 1024,
tu linea soporta 13 mb de bajada (Attainable Rate ),
y sincronizas a 6 mb (Rate),
tu atenuacion 24 db es muy buena, posiblemente tu linea soporte mas de 13 mb
el ruido (24,6 db) cuanto mas alto mejor, a la inversa que la atenuacion,
en adsl2+ 20 mb se pone en 9 db +-
en adsl2+ 6 mb desconozco el dato snr