BandaAncha.eu

  • 🔍 en 📰 artículos ⏎
  • 🔍 en 💬 foros ⏎
  • 🔍 en 👇 este 💬 foro ⏎
  • 🔍 en 👇 este 💬 tema ⏎
Regístrate Regístrate Identifícate Identifícate
ADSL

Problemas con el comtrend c536+ con jazztel.

darkoteam

los datos de mi router son:

Device Info

Board ID: 96348GW-11
Software Version: A101-302JAZ-C01_R05.A2pB017l.d15h
Bootloader (CFE) Version: 1.0.37-5.17
Wireless Driver Version: 3.91.41.0

This information reflects the current status of your DSL connection.

Line Rate - Upstream (Kbps): 874
Line Rate - Downstream (Kbps): 9476
LAN IP Address: 192.168.1.1
Default Gateway: 87.221.40.1
Primary DNS Server: 80.58.0.33
Secondary DNS Server: 62.14.2.1
Date/Time: Mon Mar 26 15:36:08 2007

----------------------------------------------------------------------

Statistics -- ADSL

Mode: ADSL2+
Line Coding: Trellis On
Status: No Defect
Link Power State: L0

Downstream Upstream
SNR Margin (dB): 8.4 9.5
Attenuation (dB): 48.5 20.9
Output Power (dBm): 29.1 0.0
Attainable Rate (Kbps): 9660 19076
Rate (Kbps): 9476 874
MSGc (number of bytes in overhead channel message): 72 9
B (number of bytes in Mux Data Frame): 244 111
M (number of Mux Data Frames in FEC Data Frame): 1 1
T (Mux Data Frames over sync bytes): 1 1
R (number of check bytes in FEC Data Frame): 10 16
S (ratio of FEC over PMD Data Frame length): 0.8239 4.0635
L (number of bits in PMD Data Frame): 2476 252
D (interleaver depth): 64 8
Delay (msec): 13 8

Super Frames: 238276 238274
Super Frame Errors: 213 1
RS Words: 18585582 16202632
RS Correctable Errors: 200306 603979778
RS Uncorrectable Errors: 8570 N/A

HEC Errors: 174 0
OCD Errors: 9 0
LCD Errors: 0 0
Total Cells: 85549754 7868892
Data Cells: 2334408 4015212
Bit Errors: 0 0

Total ES: 54 1
Total SES: 1 0
Total UAS: 15 0

------------------------------------------------------------------

pppoe_8_35_1 Diagnostics

Your modem is capable of testing your DSL connection. The individual tests are listed below. If a test displays a fail status, click "Rerun Diagnostic Tests" at the bottom of this page to make sure the fail status is consistent. If the test continues to fail, click "Help" and follow the troubleshooting procedures.

Test the connection to your local network Test your Ethernet Connection: DOWN Help
Test your USB Connection: DOWN Help
Test your Wireless Connection: PASS Help

Test the connection to your DSL service provider Test ADSL Synchronization: PASS Help
Test ATM OAM F5 segment ping: FAIL Help
Test ATM OAM F5 end-to-end ping: FAIL Help

Test the connection to your Internet service provider Test PPP server connection: PASS Help
Test authentication with ISP: PASS Help
Test the assigned IP address: PASS Help
Ping default gateway: PASS Help
Ping primary Domain Name Server: PASS Help

--------------------------------

me da dos fallos:

Test ATM OAM F5 segment ping: FAIL
Test ATM OAM F5 end-to-end ping: FAIL

el Downstream Upstream
SNR Margin (dB): 8.4 - 9.5
Attenuation (dB): 48.5 - 20.9
Output Power (dBm): 29.1 0.0

meda 48.5 y estoy a 1km de la central

me bajaron el perfil a 10megas porque tenia cortes.

he actualizaco a windows vista 32bit bajo un archivo de un ftp y me baja bien a unos 700kb (no siempre)

pero los programas p2p no me pasan de 15kbs

me podriais decir que puedo hacer? me recomendais otro firmware? o algun tipo de configuracion diferente...

aveces se me conecta el router en modo adsl normal de golpe y se corta el adsl2+ asi que en la configuracion quite todos los modos de adsl menos el adsl2+ y parece que funciona..

y si lo de los fallos atm son normales en jazztel... llame a jaztell y me dicen que eso no es un error.. que eso es un ping que hace el router a la cental pero que la central no tiene orden de jazztel de mandarla al router.. segun ellos... gracias.

Este tema está cerrado a nuevas respuestas. Abre un nuevo tema para retomar la conversación.
Ari

Todos tenemos este " fallo " que no es tal.
Test ATM OAM F5 segment ping: FAIL
Test ATM OAM F5 end-to-end ping: FAIL

De hecho, si usas el buscador verás que es uno d elos temas recurrentes en el foro. No te han mentido en Jazztel.

¿ Tienes todas las casillas de modulación activadas ? Si es así, debes dejar sólo la modulación que quieras usar. El resto debes desactivarlas.

Conecta directamente en el ptr, a ver qué datos tienes.

Saludos

🗨️ 26
darkoteam

casillas de modulacion?

DSL Settings

G.Dmt Enabled (no)
G.lite Enabled (no)
T1.413 Enabled (no)
ADSL2 Enabled (no)
AnnexL Enabled (no)
ADSL2+ Enabled (esta selecionada)
AnnexM DISABLED (no)

Select the phone line pair below.
Inner pair (no)
Outer pair (selecionada)

Capability

Bitswap Enable (selecionada)
SRA Enable (selecionada)

me recomendais otro firmware? es raro lo de los p2p... y que si activo todas las casillas de arriba aveces se corte el adsl2+ y se ponga en adsl normal...

🗨️ 20
Ari

inner pair, marcada, outer pair desmarcada.. SRA enable, desmarcada.

Edito: ¿ Estás seguro de que estás 1 km d ela central ?

🗨️ 19
darkoteam

si seguro

🗨️ 18
Ari
🗨️ 17
darkoteam
🗨️ 16
Ari
🗨️ 15
darkoteam
🗨️ 13
Ari
🗨️ 12
darkoteam
🗨️ 11
Ari
Kalimist
🗨️ 9
darkoteam
🗨️ 8
Kalimist
🗨️ 2
darkoteam
🗨️ 1
Ari
🗨️ 4
BocaDePez
BocaDePez
🗨️ 2
BocaDePez
BocaDePez
🗨️ 1
BocaDePez
BocaDePez
BocaDePez
BocaDePez
darkoteam

lo que no me cuadra es la atenuacion tan alta que tengo para estar a 1 km de la central... en el ptr tngo los mismos datos.. tngo otro router un smc adsl2+ pero cuando lo pongo el noise margin se pone loco.. se sube a 20000.... y se queda bloqueado.. :S

🗨️ 4
Kalimist

calcula aqui tu distancia:
(link roto)

distancia a la central no es lo mismo que longitud del cable (lo que expresa realmente la atenuación), éste puede dar muchas vueltas hasta llegar al destino

🗨️ 3
Ari

No va a pasar de 10 megas, ni aunque estuviera a 200 metros...

🗨️ 2
ricgarre3

Hombre lo normal... yo no llego al Km de la central de Murcia-Vista alegre y tengo 38-17 de atenuación.